Equipment Automatic Status Changes

This topic describes how to work with the following equipment status change types:

  1. An equipment unit has a measure entered against it.
  2. For example, the last measure has been recorded for a drill and the status of the drill is set to Tramming or Shift Change.

    EntryOfMeasureAgainstEquipER.

  1. An equipment unit Is allocated to a location.
  2. For example, when a loader is allocated to a loading location, its status is set to Operating.

    EquipAllocatedToLocER.

  1. A status change to a primary unit triggers a status change for its associated secondary units
  2. If the status of primary unit changes to Down, for example, the status of its associated secondary units will automatically change to Idle.

    EquipChangedToStatusER.

  1. A status change to a primary unit triggers a status change for unallocated secondary units in a selected active list.
  2. If the status of primary unit changes to Down, for example, the status of unallocated secondary units at a predefined location will automatically change to Idle.

    EquipChangedStatusUnallocER.

  1. An equipment unit is deallocated from a location.
  2. EquipDeallocatedFromLocER