Release Notes 2027

Introduction

Release 2027 is a major baseline, delivering major new functionality and rolling up a number of resolved issues.

New Functionality and Enhancements

Pitram Mobile on Android

Micromine Pitram version 17.0 brings Pitram Mobile to Android tablets. The operator interface has been rebuilt on the cross-platform Avalonia framework, so the same application now runs on both Windows® and Android. With this release, all sites move to the new interface, and the previous Windows® (WPF) client is retired. Peer to peer data transfer also works on Android, through Android versions of the Ad Hoc Network Service and Postman. Tablets can therefore keep collecting and delivering data out of network coverage, as Windows® units do today, and they use a registered site network in preference to a peer to peer connection whenever one is available.

On Android, Pitram Mobile can share the tablet with other applications, such as a vehicle's situational awareness or collision avoidance system. While another application is in the foreground, Pitram Mobile shows a small floating button on top of it. Operators tap it to switch back to Pitram Mobile, or to open a launcher menu that runs selected Pitram Mobile actions without leaving the other application. This builds on the external application support that already exists in Pitram Mobile on Windows.

The Android applications update themselves silently from the Pitram server and restart automatically. They get the update either directly from the server or from each other over peer to peer. Device management, such as Microsoft Intune, can be used to deploy the applications and grant their permissions centrally, but it is not required.

Pitram Assistant

Micromine Pitram version 17.0 introduces the Pitram Assistant, an AI assistant pane built into Data Acquisition and Event Editor. Operators can ask questions in plain language and get answers in two areas. For questions about the site's own production data, the assistant reads live Pitram data through PRIS, with read-only access. For "How do I...?" questions, it answers from the Pitram help documentation. The assistant runs on Micromine's cloud AI platform, so Pitram data is processed in the cloud only to answer the question asked.

The assistant is a licensed module, and it is not enabled by default. It will be rolled out in a controlled way: suitable sites are identified one at a time, and the feature is enabled for each of them through their licence. Each user signs in with their Micromine ID. Usage is measured against the site's AI allowance through Micromine Cloud Licensing, and the pane shows how much of the allowance is left. On site, the assistant runs as a new PITRAM Assistant Service, which needs outbound Internet access to the Micromine AI gateway and Cloud Licensing.

Drill Holes

Micromine Pitram version 17.0 replaces the paper drill plan for underground long-hole drilling with a fully digital workflow. The drill and blast engineer imports the drill plan into Pitram Portal and publishes it. The driller sees the planned holes for each ring on the Pitram Mobile tablet in the cabin and records what was actually drilled. The results come back to the control room and into reporting. Plans are attached to rings, not to individual rigs or tablets. Any rig working on a ring sees its plan, so swapping a rig mid-shift needs no help from engineering.

Drill Plan Importer

Drill plans are imported into the Drill and Blast module using the Data Importer. The importer accepts CSV files, and IREDES drill plan files that follow the Micromine Origin & Beyond format. Each plan is identified by its Plan ID. It holds the designed holes for one or more rings: name, sequence, length, dip, azimuth, diameter, breakthrough and hole type. For IREDES files, hole length, dip and azimuth are calculated from the collar and toe positions.

Drill Plans Screen

A new Drill Plans tab in the Drill and Blast module lists the imported plans with their locations, ring and hole counts, total designed length and status. Plans can be filtered by period, Plan ID, location and status. Selecting a plan shows its designed holes, grouped by ring.

Each plan moves through a simple lifecycle: Unpublished, Published, On hold and Complete. Publishing a plan sends its rings to the Pitram Mobile tablets. Unpublishing it, or marking it Complete, takes them off again, and completed plans are kept for the record.

Drill Hole Capture on Pitram Mobile

When a drill rig is allocated to a ring with a published plan, the driller opens the new Drill Data screen on Pitram Mobile. Each hole appears as a tile showing metres drilled against metres planned, coloured by its state: not started, incomplete, complete or abandoned. Opening a hole shows the planned values next to the actual values the driller enters. Drillers can add preset or free-text comments and set the hole status.

Everything works offline at the face, and the submitted holes are sent to the server once the tablet reaches the network. Redrilled holes, and extra holes approved on the spot, can be added directly on the tablet. Progress stays on the tablet across shifts, so the next crew sees what has already been drilled.

Pitram Mobile Full Text Keyboard

So that drillers can type comments on the tablet, Pitram Mobile now has its own on-screen full text keyboard. It is built into the application instead of using the operating system keyboard, which suits locked-down tablets in the cabin: operators can type freely but cannot use the keyboard to leave Pitram Mobile. The keyboard supports English, Spanish, Russian, Mongolian, Turkish, Indonesian and Greek, and operators can switch between the languages enabled for the site. Pressing and holding a key offers accented and language-specific characters. The Drill Data screen is the first to use the new keyboard, and the existing numeric keypad has been upgraded to share the same design.

Drill Holes in Reporting

The captured holes flow into the Pitram reporting database alongside data from the existing drill guidance systems. A new drill hole actuals report compares planned and actual values for each hole by shift, location and ring, and includes hole status and comments. A ring completeness summary shows how many of the planned holes are complete, abandoned, incomplete or not yet started.

Drill and Blast Improvements

The Drill and Blast module in Pitram Portal includes several improvements requested by sites:

  • Rings grouped by location: rings are now listed under their parent location, which shows how many firings it has and expands to show them. Users can see which locations still have fired rings without scrolling through every firing.

  • Comments: a new Comments column lets users add a note to each firing. The comments also appear in the Drill and Blast Open Pit, Underground and Firing Status reports.

     

Pitram Connect - Location Attributes in the Location Status View

The location status view in Pitram Connect can now show location attributes on the location cards, so users see the details that matter to their site without opening each location. Users choose up to five attributes, such as priority or flow type, and set the order they appear in. Attributes based on a list of values can also be added to the view header as filters, which makes it quick to narrow a long list of locations down to, for example, the high-priority headings. Attribute values are included in the search as well.

Automated Status Rules Enhancements

Micromine Pitram version 17.0 adds two new automatic rules that take routine updates off the control room:

  • Location status change after a duration: A Location status can now change automatically once it has stayed in a given status for a set time, of up to 24 hours. For example, a location set to one status can move to the next status 30 minutes later, with no operator action. The rule can apply to all locations or to selected ones.

  • Scheduled operator de-allocation: At a set time of day, Pitram can de-allocate all operators from selected equipment that is in a given status. This works like the existing rules that allocate primary operators to equipment, but in reverse.

     

Shift Reprocessing with Newer Reference Data

Until now, when a shift was reprocessed against the reference data in use at the time, events that used items added in later reference data versions were left out, such as a new location or material. Event Editor already shows these events, so the reporting data could differ from what users saw in Event Editor. Pitram version 17 adds a third reference data option for shift reprocessing in Pitram Portal, "Historic with tokens created in future versions", alongside the existing Historic and Current options. With this option, the shift is reprocessed against the reference data that applied at the time, but items added later are also available, so the reporting data matches Event Editor. The option can be set as the default in the configuration or chosen each time a shift is reprocessed.

UI Enhancements

Shift Planner Task Dependencies

Many mining activities can only start once another has finished. Micromine Pitram version 17.0 makes these task dependencies easier to plan and to follow. Dependencies can now be included when tasks are imported into Shift Planner from Excel, so repetitive plans with linked activities no longer have to be connected by hand. On Pitram Mobile, operators see a task's dependencies in the task menu, so they don't start a task before the work it depends on has taken place. A new Jump to next task button in Shift Planner takes the planner straight to the next task for the selected equipment or location, which makes it easier to stay oriented when planning ahead or zooming in and out.

Data Acquisition Improvements

Data Acquisition includes a number of usability improvements requested by sites:

  • Panel definition wizards for the Loaders and Trucks, Multiple Loaders, Loader Performance, Equipment Timeline, Maintenance and Fuel Monitoring panels use clearer, more consistent titles and descriptions.

  • Panel filters now work consistently. A panel's location and status filters both limit what equipment the panel shows and what can be selected from it, so equipment no longer disappears from the panel it was just edited in.

  • Person allocation can be filtered by an active list of equipment and locations, which speeds up allocating crews at the start of the shift.

  • Sublocations can be shown in the Locations navigator, so measures and statuses can be recorded against them directly. In the shotcrete panel they are grouped and ordered under their parent location.

  • The Mobile Health panel now shows each unit's external IP address, so support staff can connect to units remotely even when the units sit behind a shared network switch.

     

Integration Enhancements

Micromine Pitram version 17.0 improves several integrations with third-party equipment systems, giving sites more control over the data these systems bring into Pitram.

  • PLM: Sites can now choose which events the PLM integration generates. Swings, cycles and auxiliary measures and attributes, such as haul distances, haul and loading times and carryback, can each be switched on or off. Pitram then records only the data the site needs.

  • Sandvik DCU: Pitram Mobile now supports the token-based authorisation that the latest Sandvik OptiMine Knowledge Box firmware requires. A new optional signal log on Pitram Mobile records every signal value received from the Knowledge Box. It helps with commissioning and troubleshooting, and the log files can be requested remotely like other Mobile logs.

  • Komatsu payload: A new optional smoothing mode brings the payloads Pitram calculates closer to Komatsu's own reports by reducing the effect of suspension bounce on the readings. The existing calculation stays the default.

     

.NET 10 Platform

Micromine Pitram version 17.0 moves Pitram from .NET 8 to .NET 10, Microsoft's current long-term support release. The move covers Pitram Mobile, Pitram Control Room, the Pitram Server services, PRIS, the Dome Connector, integration adapters, Pitram Vision and the Pitram Licence Service. Pitram Mobile on Windows no longer needs the .NET Framework. Pitram Portal continues to run on .NET Framework 4.8.

Running on a supported runtime means sites keep receiving Microsoft security updates. It is also the foundation that lets Pitram Mobile run on Android. The .NET 10 runtimes install automatically when Pitram Mobile on Windows is upgraded with the AppLife package that includes the runtimes, including over peer to peer. Upgrade Prerequisites lists the runtime each component needs.

 

Other Enhancements

Pitram Portal

Description
Show Drill and Blast comments in the D&B report
Grouping Sub-locations (rings) under the parent location in D&B
Request for comments column to be added in Drill and Blast
Enable filter option: Show all unblasted locations regardless of import date
Expand on the role settings for EE
Improved user authentication prompt
Support for multiple delete in Dome Library

Reporting

Description
Add the Drill and Blast comment to the D&B Crystal report templates
Update Truck Cycle Duration Report - rearrange columns
Equipment Hours by Status Group (OID) - Hours format change
Add summary level for status on Equipment Timeline with Measures report
Month Macros vs Month Selection variation

Pitram Control Room, Pitram Mobile, Pitram Servers

Description
Display task dependencies on mobile unit
Sandvik DCU: Implemented signal log
Mobile: Improved Truck tablet source inheritance from bogger
Sandvik DCU: Implemented token-based authorisation for the RESTful API
PLM: Extended configuration profile to support optional generation of specific events
Added "Jump to Next Task" button in Shift Planner
Improved Truck Metrics integration with BLE Events
Komatsu: Improved payload averaging logic
Provide deleted events historic info to Mobiles
Improved Generated Measures for shotcrete movements functionality
Mobile Health Panel (Data Acquisition) - Added Mobile Unit External IP Address
Updated the Pitram Mobile Login Icon
Improved the user experience on editing Enter Measure - SMU Measures - Engine Hours
Location status rules support set up by duration or specific times during a shift
Added PrimOPDealllocatedFromEq Rules
Person Allocation in DA can filtered by active list
Payload used for mobileaction - TruckDump
Pitram Mobile now shows Total Measures Captured Against a Location.
Improved consistency of DA Panel filtering
Enhanced Data Acquisition Panel names and definitions
Import Shift Planner Task Dependencies from Excel

Pitram Connect

Description
Allow task measure to be unset by sending the Pitram null token (PR version >= 17 required)
Display Location measures (PR version >= 17 required)
Improved the Android app icon and splash screen display
Added attributes and attribute filters to Location Status view (to enable Location Priority attribute and filter) (Req PR version >= 16)
Added a password reveal button to Login view
Removed the Email logs and replace with either open folder to location of logs (Windows version only)
Added a 3 way theme (Auto, Light, Dark) that includes OS's current light/dark theme and default to Auto for new install
Replaced all old view select filters with the searchable select
Added the % suffix on the performance OID charts tooltip (Windows)

 

Issues Resolved

Pitram Portal

Description
Duplicated material movements when entering data via Activity Sheets
Unable to load data in Materials Management - Insert Failing in specific dbo table
Dome Reports: Max character limit for save to disk path
No Place to rename the Underground Dilution Method Column Heading
The element filter had no effect on displayed info in D&B
Visual bug where no data shows until scrolling in D&B
Reprocessing creates duplicate auditing entries with zero duration
Material Movements not loading with advance filters
Materials Management not showing movements
Materials Management: Stockpile Viewer UI Issue
Materials Management: Grouping Transactions Not Displayed in Order
Equipment Measure by Period - Destination Report retains material type even after it has been changed in the truck cycle on Event Editor

Reporting

Description
Rates and Measures with Budget Actual Report not showing Cumulative values by shift
Stockpile Summary Reports' Adjustment Values Incorrect
Equipment Assignments Report Error
Issue with Target data visualisation
The primary status on the "MAK repair states" report is incorrect.
Stocks Levels by Movement Source Report not displaying chart properly
Waypoints Report
Equipment Hours report for shotcrete Unit now showing 24Hrs.
Equipment Timeline Report with 0 durations
Equipment Timeline by Period timeline issue

Pitram Control Room, Pitram Mobile, Pitram Servers

Description
Event Editor Not Refreshing Automatically After 16.1 Upgrade
Event Editor: Clicking on a column grouping causing the edited dropdown to revert back
Event Editor: Edited event Enter key presses not applied until d or another cell is clicked
Engine Hours Measure Popup No Longer Retains Previous Value as Reference During Data Correction
DA Popups for Loaders - Popup Window Size Not Persisting
Multiple Automatic Location Status Rules not triggering when not connected to Pitram Server wifi network
Unable to capture decimal measure values in Data Acquisition on certain Windows Region Settings
Dashboard view allows for changes in Shift Planner
Trucks & Loaders are not saving the latest dump location for next dumpings
Issue with copy current SMU values in Data Acquisition
Data Acquisition: Loaders and Trucks panel, Truck colour indicator doesn't work properly
Task completion on Status change does not work
Pitram Waypoints trigger on waypoint circle radius instead of polygon after V16 upgrade
Data Acquisition: Shotcrete panel - Incorrect capacity calculation when dumping a mixer to another mixer
Event Editor does not refresh shift boss list when new reference data is received

Pitram Connect

Description
Geology toolkit on delete issues: Tablet - deleting an observation does not show details for newly selected observation. Phone: Edit then delete causes a blank screen
Maintenance - Update libraries
Geology Toolkit - iPad (only) keyboard related scrolling issues in entry screen
iOS - Shift Planner Edit - Keyboard did not show num pad by default when entering numbers
Edited material is not saved for shift plan task
App will not complete startup in specific instances under certain circumstances.
Reduced the number of database and logging operations when updating and saving out reference data version information
Add SP task edit “pending” indicators to Phone view as done in tablet Gantt / scheduler view
Shift planner - found that if an active list is set, then going into the view may cause resources to become empty
URL cursor can be hard to see in dark mode
Swapping servers can cause client id and other cached data not being cleared, as it does when the user logs out
Does not switch to offline mode properly
Allow task measure to be unset by sending the Pitram null token (Req PR version >= 17)
Do a full memory leak audit, and fix leaks
Sometimes equipment active list is empty in performance view