How can performance be measured?

There are several variations of Performance measure, each with different restraints on the type of equipment performance (reliability, maintainability etc.) that can be measured.

Performance can be calculated by material type or by source destination against equipment units, equipment model or fleet type, and according to period.

The performance measures calculated at your site will depend on your reporting requirements. Measures of reliability, maintainability, failure rate and operational life expectancy might include:

Mean Time Between Failures (MTBF)

A measure of how reliable your equipment is. The measure is a mean (average) time between failures of equipment or components. Calculations of MTBF assume that a unit is fixed after each failure, and then returned to service immediately after failure.

Mean Time To Failure (MTTF)

An estimate of the mean time until an equipment failure or production disruption. MTTF assumes that the equipment cannot be fixed and then resume its normal operation. As such MTTF may often be related to the expected operating life of a unit.

Mean Time To Repair (MTTR)

A measure of how maintainable your equipment is. It is the average time required to perform corrective maintenance on a unit of equipment. This kind of maintainability prediction analyses how long repairs and maintenance tasks will take in the event of failure. MTTR also factors in other reliability and maintainability analyses such as MTBF and MTTF.

You can monitor material movements and provide a breakdown in hours for selected units of equipment during a shift.