Equipment Status

The status of equipment refers to the state of the equipment; whether in use, idle or down for repair for example, at a specified time for a specified duration.

The Equipment Status configuration for each equipment item provides a method of recording the status of the equipment by time and duration.

For information on adding equipment to the Equipment activity sheet, see Add Equipment Activity.

For each individual piece of equipment on the sheet, you can configure the Equipment Status.

With the relevant equipment selected, click in the Time cell and enter the time at which a selectable 'event' (such as down time) began for the equipment.

Enter the duration for the event in hours and minutes (HH:MM) in the Duration cell.

Use the Status drop down to select the status of the equipment event. Status options will vary from site to site, but the basic categories are: Down, Idle, No Status and Operating.

You can save the configured event using the Save button, or it will save when you add another line.

To add another status duration for the equipment, click the New button to add a new line.

The New Equpment Status button

Enter the Time, Duration and Status details for the event and click Save.

The Cancel button will remove the line you are configuring without saving any details.

The Delete button can be used to delete an Equipment Status entry.

To add SMU readings to equipment on the activity sheet, follow the method outlined in SMU Measure Readings.