SMU Measure Readings

SMU, or “Standard Meter Unit” Measures are measures that represent the last known cumulative reading, rather than an instantaneous quantity. SMUs are almost always associated with physical metres, such as odometers or hour meters on equipment units, or total flow meters on pumps.

The SMU Measure Readings panel allows you to enter the SMU readings for the selected equipment.

For information on adding equipment to the Equipment activity sheet, see Add Equipment Activity.

For each individual piece of equipment on the sheet, you can configure the SMU Measure Readings.

To add a reading to the selected equipment, click in the Time cell of the SMU Measure Readings panel and enter the start time for the reading.

Use the SMU drop down to select the relevant standard meter unit - such as Engine Hours or Metres Advanced. These options will differ from site to site.

Enter the value for the selected SMU in the Value cell. For example, enter 1 to indicate the length of Engine Hours for the reading.

You can save the reading entry using the Save button, or it will save when you add a new line.

If required, use the New button to add a new entry to the SMU Measure Readings.

The Cancel button will remove the line you are configuring without saving any details.

The Delete button can be used to delete an SMU Measure Readings entry.