Non-exclusive Equipment States

A unit of equipment can have any number of either of these types of states. For example, it can have more than one non critical or prestart faults.

Non critical faults

Non critical faults are defects rather than a faults that cause the unit to stop operating. A broken side mirror or an loose indicator, for example.

If a unit is sent to the workshop for a critical fault, the listed non critical faults would probably be dealt with at the same time. A unit can have any number of non critical faults at a time: they are non exclusive states.

Non critical faults are defined in Groups | Configuration Items | States | Equipment States | NCFStatus. They are assigned using the Data Acquisition Non Critical Faults panel.

Prestart faults

At the beginning of a shift, Micromine Pitram Mobile can be set to automatically run a prestart check. The Operator must follow the procedure of passing or failing items in the prestart check list. A unit can have any number of prestart faults at a time.

 

Prestart faults are divided into categories. This is a way of classifying the importance of a fault. Generally, faults range from critical (unit cannot be operated) through to non critical (unit can be operated: fault has been recorded). Category A, for example, may be critical through to Category D, non critical.

Prestart faults are defined in Groups | Configuration Items | Mobile Settings | PrestartCategory, PrestartItem and PrestartProfile. Define the PrestartProfile and the PrestartCategory (the category name and screen message) before defining the PrestartItem.

The PrestartProfile can define an active list which lists a particular set of items available for the prestart. In this way, a profile can be customised for a particular equipment type. For example, a profile for the loaders and another for the trucks.

Exclusive Equipment States