Development Advance

The purpose of Surveying | Development Advance is to compare surveyed advance values against the claimed or saved values for a drive. The surveyor will measure the advance distances and enter them into the Development Advance window:

Claimed values are derived from drilling results (e.g. Metres Advanced) and source/destination movements (e.g. Tonnes) entered, using Data Acquisition.

Survey values are checked measurements made by the Surveyor.

Drive

The data grid header allows you to filter by Drive. Enter a Drive name in the Search box and press Enter.

Period

The data grid header also displays the period. Select the appropriate Start and End dates to define the period that you want to work with. Click Apply to save the settings. The data grid displays any locations for which there are existing movement measures during the defined period.

Reload

Click Reload to access the most recent data.

Show

Select from the Show drop-down list to determine the number of records to display. Selecting Auto displays all records.

The image below shows some sample data:

The data grid displays a single record for each location (or drive) for a shift, for the defined period. A record will be displayed if:

  • A Measure value has been recorded during the period, for either the material quantity or the advance distance, or
  • A Survey distance has been recorded for the location at the end of shift.

If the site has:

  • No defined locations as drives, it is likely that the surveyed advance distance would be updated either monthly or when the drive was completed.
  • Locations as a subset of a drive, it is likely that the advance distance would be updated more frequently - e.g. at the completion of each individual location or advance, or at the end of the shift.

Data Grid Columns

Each record in the data grid comprises the following columns:

Column Description
Drive

If Map Locations to Drives configuration is:

  • selected, then a drive can consist of many locations. Each location will have a separate measured advance.
  • not selected, then the drive will have only one measured advance.
Gradient If Show Gradient configuration is selected, show the gradient of the current drive.
Survey Shift The shift during which the survey measurement was taken.

The default shift displayed is the last shift for the defined period.

Mining Method Mining Method is defined in Configuration Items | Surveying in Reference Edit.

Mining Method has no effect on the Survey or Claimed results.
Design Area (m2) Design Area is defined in Configuration Items | Surveying in Reference Edit. A Tunnel Design Area attribute is configured in units of m2, which is calculated as the width * the height of the tunnel.

Select a Design Area option from the drop-down list. This is used to quantify the Claimed and Survey volumes (Design Area * Advance).
Specific Gravity This is the material density. This factor is used to convert a volume to a mass (m3 to tonnes). A default value, defined in Configuration, is displayed. A precision of two decimal places is used.
Chainage The distance along a drive from the surveyed start point to the end of the current advance.

A precision of one decimal place is used.

\

Chainage.

Survey Columns

Column Description
Advance (m) The surveyed distance in metres, feet or yards that a drive has advanced during the survey period.

A precision of one decimal place is used.
Volume The volume = Design Area * Survey | Advance. If Survey Volume is Read Only is set Configuration, this value cannot be edited.
Tonnes The tonnage (i.e. sum of all movements from this drive in the surveyed period) = Survey | Volume * Specific Gravity.

If Survey Tonnes is Read Only is set in Configuration, this value cannot be edited.

Claimed Columns

Column Description
Advance (m) For display only.

This is the claimed distance, saved as an event in the database. For example, this value would have been the achieved Metres Advanced measure that a jumbo or drill achieved during the shift.

A precision of one decimal place is used.
Volume For display only.

The volume = Claimed | Tonnes / Specific Gravity
Tonnes For display only.

The tonnage (sum of all movements from this drive in the surveyed period).

Edit a record

To edit a record, double-click on the record or row.

For each editable field, a text box, e.g.Specific Gravity, or a drop-down list or calender (e.g.Survey Shift) becomes available for editing.

When you have finished editing the details for the record, click Save.

Add or delete a record

To Add a record, click the plus + button at the lower-left of the workspace. An empty record will be added to the workspace. When you have entered the details for your new record, click Save.

Similarly, click the minus - button at the lower-left of the workspace to delete the currently selected record.

Summary display

When you click on a record in the workspace the Summary panel is displayed at the bottom of the workspace.

The Summary presents the following information for the current drive:

Item Description
Total Surveyed Advance Sum of all surveyed advance measures.
Total Surveyed Volume Sum of all the survey volumes (Design Area * Survey | Advance).
Total Surveyed Tonnes Sum of all the surveyed tonnes (Survey | Volume * Specific Gravity).
First Survey The date of the first survey entered for the drive.
Last Survey The date of the last survey entered for the drive.
Total Claimed Advanced Sum of all the advances, recorded as events in the database, for the drive.
Total Claimed Tonnes Sum of all the movement measures, recorded as events in the database, for the drive.