VIMS Profile
| Attribute | Data Type | Description |
|---|---|---|
| Hardware Display Name | T | The display name of the hardware device. |
| Measure Code | T | Select the measure used by the device from the list of configured Measure codes. |
| Port | T | The com port used to connect the hardware device. |
| Read Only Mode | 0 or 1 | Define whether the device is in read-only mode or not. |
| Obtain Dump Tonnage From | Haul or Load |
Whether the dump payload tonnage should be obtained from the dump event or the haul event. The usual value is Haul. |