Tag Reader Profile

Attribute Data Type Description
Hardware Display Name T The display name of the hardware device.
Port T The com port used to connect the hardware device.
Tag Group Code T The Group codes for which the Tag Reader should report tag. For example, Group1,Group2 and so on in a comma delimited format.
Tag Timeout N The tag timeout in seconds. If nothing is heard from a tag for longer that the defined time, the tag is considered out of range.
Detection Range 1 to 8 The detection range of the tag reader.
Signal Strength Threshold N

The minimum signal strength for the tag reader to be considered nearby.

A signal strength is in -dBm units. The lower the number the higher the signal strength required. A value of 0 means that there is no threshold.

Note:With the reader is set at maximum radio power the highest signal strength observed with tag right near a reader is 40. The lowest tag before cut off is 100.