Operational Profiles
It is recommended that separate OperationalProfiles be defined for:
- Loaders. The attribute Auto Loading Status Enabled = 1. The following three default values must be defined (see table below).
- Trucks. The attribute Auto Loading Status Enabled = 0. The following three Default values need not be defined (see table below).
| Attribute | Data Type | Description |
|---|---|---|
| Primary Equipment Active List | T | Select the appropriate primary equipment active list. |
| Operating Status Active List | T | Select the appropriate Operating status active list. |
| Idle Status Active List | T | Select the appropriate Idle status active list. |
| Check Zone For Dump | 0 or 1 |
Select to check or not that this equipment unit is within a defined zone before dumping material. If so, the material type on board will be checked to ensure that it is the same as defined for the zone. Zones are defined in the Zone reference group |
| Prompt for operator role on logon | 0 or 1 | Whether or not to prompt for the operator's role when the user logs on. |
| Prompt For Location on Dump | 0 or 1 |
0 or 1 Whether or not to prompt the user for their dump location (if zone fails to find it). |
| Enable Auto Idle | 0 or 1 | Whether to enable auto idle functionality (to switch operating trucks that have been idle for too long) to an Idle status. |
| Auto Idle Status Active List | T | Select the appropriate Auto Idle status active list. |
| Delay Radius Metres | N | The radius in metres, within which the truck is considered stationary. |
| Delay Time | N | The time in minutes a truck must remain within the delay radius for it to be considered stationary. |
| Prompt For Delay | 0 or 1 | Whether or not to prompt for a delay state when the truck is considered stationary. |
| Unknown Status Delay Code | T | The default delay code used when the truck is stationary. |
| Enable Automatic Operating | 0 or 1 | Whether or not automatic operating is enabled. |
| Operating Activation Distance | N | The distance in metres a truck must travel to be considered for automatic operating. |
| Operating Activation Speed | N | The speed in metres per second a truck must be travelling to be considered for automatic operating. |
| Enable Automatic Operating | 0 or 1 | Whether or not automatic operating is enabled. |
| Auto Operating Status Active List | T | Select the appropriate auto Operating status active list. |
| Operating Activation Speed | N | The speed in metres per second a truck must be travelling to be considered for automatic operating. |
| Default Operating Code | T | The default operating state that is entered when automatic operating is triggered. |
| Prompt For Loader on Load | 0 or 1 | Whether or not to prompt a truck for its loading allocation when a load event is triggered. |
| Prompt Method | N |
Defines whether to prompt for a primary allocation when queuing or loading. 0=never prompt. 1=prompt when multiple. 2=always prompt. |
| Prompt for Engine hours on Logon | 0 or 1 | Whether or not to prompt for the trucks engine hours when the user logs on. |
| Prompt for Engine hour on logoff | 0 or 1 | Whether or not to prompt for the trucks engine hours when the user logs off. |
| Prompt for location on logon | 0 or 1 | Whether or not to prompt for the trucks location when the user logs on. |
| Prompt for location on logoff | 0 or 1 | Whether or not to prompt for the trucks location when the user logs off. |
| Prompt for operating state on logon | 0 or 1 | Whether or not to prompt for an operating state when the user logs on. |
| Prompt for Idle State on logoff | 0 or 1 | Whether or not to prompt for an idle state when the user logs off. |
| Enable temperature Reader | 0 or 1 | Whether or not the temperature reader is enabled. |
| Temperature Update Interval | N | The time, in milliseconds, that defines how often the temperature updates. |
| Play Warning Sound on GPS Fix | 0 or 1 | Whether or not to play a warning sound when GPS fix changes. |
| Play Sound on Connectivity Changed | 0 or 1 | Whether or not to play a warning sound when connection to a server is gained or lost. |
| Auto Loading Status Enabled | T |
Select an Operating states from the list. If not set then units in any Operating status will be considered. For loaders this value must be = 1. |
| Default Loader Digging Status | T |
The Operating status that the loader must be in before automatic states are active. For loaders a value must be defined. |
| Default Loading Cycle State | T |
The loading cycle state for the loader. For loaders a value must be defined. |
| Default Waiting Cycle State | T |
The waiting cycle state for the loader. For loaders a value must be defined. |
| Surface Miner Dispatch Enabled | 0 or 1 | Whether to enable surface miner dispatch. |
| Swap Operator Enabled | 0 or 1 | Whether to prompt if just swamping operators or logging out. Does the operator click Logout on Mobile. |
| Prompt For Engine Hours On Hot Swap | 0 or 1 | Whether to prompt for engine hours on log out. |
| Swap Operator Primary Status | T | The status to switch to during operator hot swap. |
| Tkph Monitoring Enabled | 0 or 1 | Whether monitoring of Tkph and raising of Tkph alarms are enabled. |
| Tkph Measure Code | T | Select a TKPH measure code used for the calculation from the list of defined measures. |
| Display Tkph Alarms | 0 or 1 |
1. If the Tkph alarms should be displayed on the mobile unit that raised them. 0. If the alarms will only appear in Data Acquisition. |
| Loader Location on Zone Entry | 0 or 1 | Whether to display the zone when the loader is allocated to a zone, or when the loader is within the zone. |
| Prompt Material on Location Change | 0 or 1 | Whether a loader should prompt for a material type on change of location. |
| Display Allocation Notification | 0 or 1 | Whether to display a notification window when the primary allocation of equipment changes. |
| Logon Message | T | Optional message that will show when the operator logs onto Mobile. |
| Logoff Message | T | Optional message that will show when the operator logs off Mobile. |
| Hotseat Logoff Message | T | Optional message that will show when the operator does a hot seat logoff. |
| Hotseat Logon Message | T | Optional message that will show when the operator does a hot seat logon. |
| Emergencies Enabled | 0 or 1 |
0. Disable operator's ability to declare an emergency. 1. Enable operator's ability to declare an emergency. |
| Prestart Profile | T | Select the appropriate prestart profile from the list that have been defined. |