PLM Integration

Reference data groups can be configured to allow integration between Micromine Pitram and Komatsu PLM II legacy systems installed on open-pit haul trucks (such as the Komatsu HD465 series) via a Serial COM / RS-232 port. This connection can be configured via the PLM2Profile in Reference Data.

For J1939 CAN bus connections via a CAN Port / vehicle network adapter, the Komatsu Integration should be used.

PLM2 integration collects operational data from the truck and generates an optional set of Pitram events - including swings, cycles and auxiliary events.

The following information outlines how to configure Komatsu PLM II device integration.

Reference Data Deployment

The following Mobile attributes should be deployed:

  • MobileSettings →PLM2Profile

  • MobileUnitConfiguration

    • PLM2Profile

       

Mobile Profile

A new profile for Komatsu PLM II needs to be defined/created using the PLM2Profile reference attribute.

  1. Navigate to Mobile Settings → PLM2Profile.

  2. Check Out the table and,

  3. Click New.

The following parameters must be configured:

Mobile Unit Configuration

With the PLM2 Profile configured, you can configure the Mobile Unit Configuration for your Komatsu PLM II integration.

  1. Navigate to Mobile Settings → MobileUnitConfiguration.

  2. Check out the table.

  3. Select the specific required Equipment and,

  4. Set the PLKM2Profile to the reference data token that you created.

  5. Click OK to save the change.

Integration

For the PLM II system to function (such as for automated loading or reporting), the following general equipment attribute should be set:

  • Equipment → UsePayloadSystem

    Set to 1 to enable payload-based rules and data collection

     

Publish

Check in and publish all of the changes to Reference Data.

When you open Mobile for the Equipment that has been assigned the Komatsu PLM II profile, if the configuration was applied successfully, the device will be available in Mobile.

Note: The above is TEST data and for illustration purposes only.