Grade Control
On the Script tab, in the Macro Commands group, select from the following Grade Control macro functions:
| Menu | Macro Function |
|---|---|
| Setup (Wireframes) | GCSETUPWF |
| Setup (Polygons) | GCSETUPPOLY |
| Tag Ore | GCTAGORE |
| Tag Waste | GCTAGWASTE |
| Tag Top Surface | GCTAGTOP |
| Tag Bottom Surface | GCTAGBOT |
| Clear Tags | GCTAGCLEAR |
| Auto Save Extruded Wireframes | GCTOGGLESAVEWF |
| Run Report | GCRUN |
The available Grade Control macros are required to automate Grade Control using macros. These macros are identical to the corresponding Grade Control commands and should be used in the same manner.
The typical workflow for Grade Control is:
-
Open and configure a Setup form to define wireframe/polygons input files, input parameters and outputs.
-
Interactively tag selected polygons as Ore/Waste/Top/Bottom.
-
Run the Reporting tool.
These steps are performed the same way when using macros, except the layers will need to be loaded via macro and selected via macro (Select by condition) in order to perform tagging.